Best Miter Saw Under $200 in 2023 – Reviews & Buying Guide

best miter saw under $200

Well, you are here because you wanted to buy the best miter saw under $200.

You can rely on us because this is a researched article.

But before read the full article, here is an introduction about miter saw.

With new advanced technologies come new methods. People always want their hands to the latest technology so that their work can be done efficiently and effectively. Professionals always want their work to be precise and accurate and use one of the best tools and equipment available for it.

One of the types of equipment which are used widely for cutting different types of materials such as wood, plastic, steel, aluminum is miter saw. Miter saw is a tool used for precision, accuracy to get great cuts.

This article will be discussing some of the best miter saws available which come at a great catch at just under $200.

Top 10 Best Miter Saw Under $200 Reviews

Here are top 10 best miter saw which prices are under $200. So if you have a tight budget, you can buy anyone from the below list.

1. Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops

The genesis GMS 1015LC is one of those miter saw which makes your job easier. It cuts with precision and accuracy.

It has a 60 tooth carbide blade to cleanly cut through the wood soft plastics. The device can make miter cuts left to right up to 45 degrees. The compound cutting feature to easily cut picture frames. This saw comes with a hold-down clamp to easily cut it through the material.

It also has a blade wrench for accurate unit measurements. A dust bag is also been provided to allow easy cleanups to the user.

  • It comes with a two year part and labor warranty.
  • The machine weighs only 24 lbs which means you can carry it anywhere.
  • It comes with a set of batteries.
  • The life span of the laser light system is short.

2. Evolution Power Tools R255SMSL 10″ Multi-Material Compound Sliding Miter Saw

It’s one of the best saw available at a great price as it offers quality and durability and gives full performance.

The evolution power tool RAGE 3SFP is durable as compares to its price and you can even use it for bigger and heavier cutting tasks. The saw gives great performance and cuts accurately at great precision.

It produces no heat while cutting, its advance laser integration offers you to enjoy the best cutting experience. Evolution Rage 3SFP is a multipurpose cutting tool as it allows you to make compound miter cuts in steel, aluminum, plastic and wood with the included blade.

  • It is a multipurpose saw which can cut aluminum, wood, plastic, and steel.
  • It produces no extra heat or sparks.
  • Ultimate laser light system for precise cutting.
  • Sensible materials.

3. Hitachi C10FCE2 Compound Miter-Saw

It is a 10-inch compound miter saw that comes with a number of unique features and also has the tendency to adopt changes such as the laser cutting capability for more precision. It is the best miter saw for furniture making.

The hardest jobs are easily done with its 15 amp motor. It is also easy portability due to its low weight i.e. 26.3 pounds. It comes with a dust collector that makes cleaning easier after the work is complete.

Unlike most of the other miter saws, it has increased stability due to its larger table. It allows highly precised cutting with a wide 0 – 52 angle range. You can make most of the beveled cuts as this miter saw allows you a 0 – 42 angle range to the left.

  • Works well for all sizes of wood pieces.
  • It comes with a five-year warranty.
  • Other useful accessories come along which give it an edge over the others.
  • The guide is tricky to understand for the users, especially for newbies.

4. Delta Power Equipment Corporation S26-262L 10″ Shop Master Miter Saw with Laser

You can always trust Delta S26-262L when it comes to crown molding. People have also reviewed it as the best miter saw for homeowners.

It can take up to top rotations per minute with its 15 amp motor. The 10-inch carbide blade gives it the freedom to cut any material with ease. Tough or wet timber is easily handled by this miter saw.

An alignment laser supported by a battery comes with the saw for precise cuttings. A horizontal clamp is provided so that the piece is perfectly clamped with no chance of dislocation. Adjustable bevel stops and wide-angle range makes it easier for you to cut in proper shape without hassles.

  • Comes with a 3-year warranty.
  • No compromise on quality with price fluctuations.
  • Assembling is easy.
  • The horizontal clamp cannot handle all sizes of wood pieces.

5. WEN 70716 10-Inch Sliding Compound Miter Saw

This is the best miter saw floor lamination. Now you can laminate floors without any hassle.

It has a winning edge over the others with 5500 rotations per minute due to 15 amp motor. The cuts made by it are more accurate because the carbide blade has 60 teeth.

With crosscuts or miter cuts, it can make fine cuts in any type of wood. Cleaning along with working is made possible by this miter saw as it comes with a dust collector.

It comes with a clamp that reduces the risk of error and you can have accuracy as well as stability.

  • Wide range.
  • Precise cutting.
  • Accuracy.
  • Easily portable.
  • No guide is available.
  • Insulation gives rise to smell for a first few minutes of usage.

6. Delta Power Equipment Corporation S26-263L Shopmaster 10 In. Slide Miter Saw

This miter saw is labeled as the top and best miter saws currently available in the market easily. It is also among the best miter saws for the home-owners.

It is a combined version of power & capabilities. This is one the best budget miter saw you can have with all desired qualities. Delta Power S26-263L can be easily moved to places with its compact size and lightweight i.e. 15.12 pounds.

It comes with a 10 inches carbide blade allowing blunt cuts. Delta is the perfect miter saw for cutting, molding, cross-cutting, and miter cutting.

  • Highly durable.
  • Improved accuracy.
  • 3-year warranty and 1-year free service contract.
  • It cannot be held on job sites.

7. Genesis GMS1015LC 15-Amp 10-Inch Compound Miter Saw with Laser Guide and 9 Positive Miter Stops

If you are searching for the best sliding compound miter saw, Genesis GMS1015LC is the best choice you can make.

It is the best miter saw as it can be used at job sites as well as at home. Genesis GMS1015LC comes with a 10-inch blade that makes it easier for you to make precise cuts and a handle that makes portability easier too.

It also has a cross-cut positioning system which gives you a chance for adjustment in free cuts. Jobs can be easily and quickly done. The 15 amp motor allows 4600 rpm.

  • Increased durability.
  • Two-Year Parts and Labor warranty.
  • Accuracy.
  • High precise quality with ease.
  • Lacks adjustable bearings.
  • The user manual is tricky to understand.

8. Evolution Power Tools R185SMS+ 7-1/4″ Multi-Material Compound Sliding Miter Saw Plus

The Evolution R185SMS+ is a saw available at a great price. It is one of the best sliding miter saw for homeowners.

It comes up with a 10 Amp motor for toughest cutting jobs and has a 7-1/4 inches single bevel compound.

This saw has a good angle range It offers a wide range of angle up to 50 degrees to both left & right. It is a portable model since it weighs about 24.1 pounds. So its powerful saw provides a maximum cutting capacity.

It’s inexpensive as compared to other miter saws.

  • It has a vast range of angle.
  • Since it is lightweight it can be carried along anywhere easily.
  • It has a powerful motor.
  • The dust particle bag is useless.
  • Create loud noise.

9. Evolution Power Tools R185SMS 7-1/4″ Multi-Material Compound Sliding Miter Saw

It is the best miter saw for picture farming. The Evolution Power Tools R185SMS miter saw will easily cut steel, aluminum, wood and plastic using one blade. It offers accuracy so that you won’t face any problem while working.

It is equipped with multipurpose technology, it helps you to cut material even with a single blade. This machine helps you in cutting with precision and accuracy as it produces no heat, no burr, and virtually no sparks while cutting.

Evolution Power Tools R185SMS machine can cut in depth way, compound tilt and slide mechanism for long angled cuts.

It can be used easily by right or left-handed people. Weight is only 23 pounds so it is very lightweight.

  • It comes up with a 3-year limited warranty.
  • It also comes with an instruction manual.
  • The box contains a laser lens cap.
  • Nothing serious issue.

10. Hitachi C10FCG 15-Amp 10″ Single Bevel Compound Miter Saw

It is a non-sliding miter saw, it has a 15 Amp motor which helps you in cutting the material with great precision and accuracy. Blade size is 10 inches.

Hitachi C10FCG is portable and only weighs 24.2 pounds which is easy to carry and it has a 0-52 miter angle range to the right and left for increased flexibility.

The motors contain a horsepower of 2.57 Hp. 15 Amp motor helps you to cut the toughest material and delivers high power. As we knew, it is only 24.2 lbs so we can say it is very lightweight.

  • It’s light in weight.
  • Hitachi C10FCG offers a range of 0-45 degrees to the left.
  • It helps in getting clean and accurate cuts.
  • It doesn’t come up with a set of batteries so you may face difficulties regarding it.

Best Miter Saw Buying Guide in Budget Price

Miter saw is an instrument used for the precision, accurate cuts over and over. People have lots of thoughts in mind before purchasing a miter saw. Before making any decision, make sure you know the types of miter saws available in the market.

Standard Miter Saws

It is the most basic type of miter saw you can find. It allows precise angle cuts to the extent of 45-degree angle. Bevel cuts are not possible with the standard miter saw but it can be bought when it comes to budget.

Compound Miter Saws

Bevel cuts are possible if you add a table saw to a standard miter saw. But using two saws is difficult so most people go for compound miter saws. It has the ability to incorporate bevel and angle cuts. The base can move along the support allowing angle cuts whereas the head of a miter saw tilt making bevel cuts easier.

Compound miter saws have further exceptions. One of the exceptions allows bevel cuts in both directions. Such miter saws are termed as double-bevel compound miter saws. You can do the calculations and make easy bevel cuts in both directions. The compound miter saws with single bevel tilt in one direction only.

Sliding Compound Miter Saws

Miter saws limit you with the cutting size if the size of the board is slightly narrower than the blade size. The sliding compound miter saw has removed the limit. These miter saws are a little heavier than the others but you can make all types of precise cuts. If you add in the laser that most the compound miter saws have now, the cuts become more accurate and efficient.

Once you are aware of the types, the choice will become easier as you can judge every alternative according to your use. You need to consider the following points before purchasing a miter saw which suits you and comes with a great catch. You need to make sure that you are familiar with all the features of that miter saw and how they are going to affect your work.


The blade is what determines the height, depth, or how the finer the cut will be. Miter saw comes up with blade normally ranging from 8, 10, or 12-inch blades. These blades come in different sizes for cutting different styles which are multipurpose use for cutting material including wood, aluminum, and mild steel.

The more the teeth in the blade means you are going to get a smooth cut and your work will be done efficiently. Normally, a 10-inch blade has an edge over other ones because it is interchangeable with a table saw.

Power Source

Miter saw motors come in different power ranging from 10, 12, or 15 AMPs. AMPs measure the power of the saw for cutting which means higher the power of the motor ultimately leads to higher cutting power.

You would first need to consider which type of material you want to cut on, such as if you are working with plywood or mahogany you should use a 15 AMP motor, whereas if you are using to cut a thinner wood like pine you can use a less powerful motor.

Angle Ranges

A miter saw is a saw which cuts at a defined angle. Almost all miter saw cuts at 45-degree angle for right-angle joints. Some miter saw can tilt to only one side, most will tilt to the right or left making it effective for use. Miter saw having positive dents are highly preferred as they lock the saw’s movement until they are released. This helps you to get the most accurate cut. The most common angles are 90 degrees, 45 degrees, and 22.5 degrees.

Saw Type

It’s obvious that the more sophisticated the style and design of miter saw is, the greater the price you have to pay for it. Miter saw comes in three types which have different features and each of them differs from each other.

1. Stationary Compound

This type of miter saw can cut to the left & right but in the only direction.

2. Sliding Compound

Sliding compound miter saw as the name suggest can move forward & backward along the rails to cut the material.

3. Sliding Dual Compound

The sliding dual compound miter saw is quite a bit expensive as it can do everything the stationary and sliding compound can do but it can also make bevel cuts to both rights and left also. It is preferred to consider one of the respected brands which suit you and your work.


The head of a miter saw will tilt at different angles giving an advantage to the user. Sometimes it becomes difficult to cut wood pieces in different shapes or cut it at different angles. While choosing your miter saw, you can also consider the bevel/compound of the miter saw. Some miter saws come with a wide-angle range like 0 – 45 degrees making it easier for you to cut the wood pieces precisely.


With the passage of time, producers have realized the importance of time and efficiency. To help their customers, different accessories are provided with miter saws so that your work becomes easier and less time-consuming. You can look for the accessories you can get with the miter saw. Accessories include blades of different shapes and sizes. The material used for the blades is also considerable.

Dust Collectors

Cleaning after completing a task has always been a problem. While making your decision, you can look for dust collectors. The collectors allow easy cleaning after cutting wood. Some miter saws have advanced dust collectors that collect dust while you are working. The other dust collectors work after completion of y our job.

Other Features

These days miter saws come with a variety of features so that you can use it with ease at your work. They are now effective and efficient and help you save time at your work. Many miter saws now a day’s comes with the built-in light option so that it may come handy when working in bad lighting conditions.

Some come up with a built-in laser light lines which helps you in cutting the wood as it shows a red line across it. Emergency brakes or electric brakes are been introduced in miter saw which helps you to stop the blade quickly when you are working.

Miter saw also contain variable speed dial, that helps you to adjust the speed of the motor according to the material you are cutting.

The Best Brands for Miter Saws

Miter saws have great importance when it comes to wooden stuff. The market is full of brands that provide miter saws but not all are reliable. To have the best miter saw for your wood, you need to perform proper research so that you do not waste your time, money, and efforts on a useless brand that claims to be the best.

Here are the top brands of 2022 that can help you with the wood. You can trust them blindly when it comes to miter saws. The best miter saw reviews have proven them the best. Choose your miter saw wisely.

  • Chicago Electric Harbor Freight 12″ Miter Saw Lower Guard
  • Ryobi ZRTSS120L 15 Amp 12 in. Sliding Miter Saw with Laser
  • Hitachi C10FCH2

FAQs – Miter Saw

Here are some common questions including answers about miter saw. If you like to know about miter saw quickly, this is the best part for you.

Q1. Is there anything else needed with a miter saw?

Answer: This totally depends upon the job you are doing. If you are working at a construction site, your needs are different. If you are a DIY person and are planning on making something at home for yourself, you will need different accessories.

Q2. Which miter saw is most convenient for a homeowner?

Answer: For a homeowner, a standard miter saw is a better option. But again, if you are planning to make furniture for your home, a compound miter saw is the best option.

Q3. How can I adjust the miter saw on my own?

Answer: Guides are complementary with the miter saw you order. Give the manual a read and you will easily adjust the miter saw. If you are unable to understand the manual, easier guides are available on the internet as well. You can watch videos that show the arrangement.

Q4. How is a compound miter saw more advantageous than a standard miter saw?

Answer: The compound miter saw allows bevel cuts at different angles, whereas, the standard miter saw can support angle cuts only.

Q5. Is it important to have a laser guide?

Answer: No, it is not that important. Just a little attention would be enough. You do not need a laser guide if the area is well laminated. Red diodes are harmful so workers have moved to green diodes for laser. But you will need the laser guide if the room or place you are working in has dim lights.

Q6. Where can I find cutting instructions for the machine?

Answer: You can find the instructions in the specification in the operator’s manual.

Q7. What if the saw isn’t cutting at the correct angles?

Answer: If your saw is not cutting at the correct angles make sure you have read operators manual. Also, make sure the blade is not damaged because a damaged blade cannot cut precisely and with accuracy. Also, make sure the blade is parallel in the cutting slot table. If the blade is not parallel then it will not give a good cut.

Q8. How would I unfasten the blade bolts?

Answer: Most of the users face difficulty in unfastens the blade bolts and sometimes it is messy. So, if the bolts are in a left-handed thread then unfasten it in a clockwise direction otherwise in an anti-clockwise direction.

Q9. What if the blade stopped spinning while I am cutting?

Answer: Most of the users face this problem when the blade stops spinning while actually acting. You first need to check out that if the motor is working properly and it sounds normal then you need repair gearbox.

Q10. What should I do if the machine stops in the middle of cutting?

Answer: Sometimes the users might face that machine stops working in the middle of cutting. The machine will shut down automatically because of the damaged blade as it causes an overload of electricity.


Miter saws have turned the direction of carpentry. Wood pieces can be cut into different shapes and have all the unique cuts with ease and accuracy. They are real-time saviors. If you go through the buying guide thoroughly, you can make a budget-friendly yet efficient choice.

Similar article: Best Saw for Cutting 2X4 Reviews and Buying Guide

Leave a Reply